Develop turns a direction into clothes that can be made, and made again the same way. This page follows one piece from Freud Sitters, the waistcoat with lamé lapels, from its first sketch to its tech pack.
Each step costs more to change than the one before: a line on paper, a seam in cotton, a cut in leather. Leather keeps every needle hole, so the cut is not tried out in it: it is settled in a cotton toile first, and the leather is cut once the toile fits. Choose a step beside the picture to see it.
These numbers make the piece repeatable. The factory measures each finished piece against them, and the size guide in a shop is written from the same chart.
The tech pack is the document a factory works from, and the record each piece is checked against. You receive one for every piece, with its sketch, its sample and its 3D garment. Point at the sheet to read it.
- File
- One A4 page per piece, sent as a PDF.
- Revisions
- Every change is dated on the sheet, so the factory works from the latest.
- Status
- Each sheet says how far its piece has come, from drawn to sample made.
The colours found in the research become the collection's palette. Every piece is then drawn the same way and at the same height, so the line can be read as a whole: what repeats, what is missing, where each colour sits.
Each piece is also built in 3D, on the studio's figure. What the drawing shows flat, the 3D garment shows in the round, so the piece can be turned and judged from every side.
On the same figure, the pieces can be compared with one another: their lengths, their widths, the shape each one makes. Choose another piece below.
Sections
The tech pack says what a piece is; what happens inside its seams decides whether it can be made. Six cuts through the waistcoat show the layers a factory has to put together, and the order it puts them together in. Choose a cut on the drawing, then wind the build back.
Shell and gold facing meet at the edge, are turned and glued flat, then edge-stitched 2 mm in. The glue keeps the two layers together, so the edge neither curls nor shows a seam.
Each cut is drawn at its own scale; the bar is 5 mm. The shell's thickness, the stitch distances and the button are the tech pack's. The other thicknesses and widths, and the way the pocket bag and the hem are put together, are illustrative.